Electric Forklift Truck RX60 1.6-2.0 t

Electric Forklift Truck RX60 1.6-2.0 t

For the really heavy work.

MENU

กลุ่มบริษัทในเครือ

 

Highlights

* More security with electric brakes
* High performance and driving dynamics
* Faster and easier ascent and descent, and a relaxed leg position when driving

รายละเอียดสินค้า

Safety
Electrical braking when the drive pedal is released, and the fully automatic hold-on-ramp feature which works without using the brakes, plus the mechanical parking and service brake guarantees safe use at any time. Battery changes on the RX 60 are carried out using a hand pallet truck, low lift pallet truck, forklift truck or hoist. Along with the considerable saving in time compared with conventional craning of the battery, especially with cab variants, this concept minimizes the risk of crushing and damage of any sort that could occur with a heavy swinging battery.

Drive
The two energy efficient and noise optimised three-phase drive units on the RX 60 act on the front wheels. High traction power and driving dynamics, even on uneven ground or when climbing ramps, ensure a high turnround of goods.

A special feature of this is the uniformly strong development of the power from a standstill up to maximum speed. In addition, the RX 60’s power boost function, whereby a momentary increase in power is provided when needed, is a particularly useful characteristic when pushing pallets or starting on ramps, for example. The maintenance-free, efficiency-optimised three-phase drive guarantees a long battery operating life. Thanks to complete enclosure the whole drive is protected against the ingress of damaging dust and water spray, so that even applications in the worst conditions are no problem.


In addition to this, thanks to their electrical regenerative braking, the motors feed back up to 15% of the energy into the battery when the drive pedal is released, and thus increase the useful time from a battery charge by up to 1.5 hours. This means that interim battery charging or even changing is often not necessary. The STILL controller ensures sensitive driving with optimal utilisation of energy. It also enables the truck to be held on ramps without using the maintenance-free multi-disc brakes, for greater safety and driving comfort. The power electronics are protected within the counterweight. The heat from the controller is dissipated into the counterweight over a large area. This arrangement provides very good cooling without additional fans or filters and makes the work pleasantly quiet and reliable.

Driver’s compartment
* The driver’s work place in the RX 60:
* The large footwell with its inclined floor plate and anti-slip covering provides quick convenient entry and exit and also a relaxed leg position when driving.
* The adjustable steering column with its small steering wheel provides an ergonomic match to the driver and reduces steering movements.
* The automotive style foot pedal arrangement can, if wished, be replaced by a double pedal arrangement, to adapt the RX 60 to whatever the driver is familiar with, for a maximum turnround of goods.
* The drive direction switch on the valve lever (hoist and lower) aids untiring concentrated work, even during long shifts, because it allows convenient changing of the drive direction without changing grip.
* Thanks to the heated fully graphic display, the time, maintenance intervals and battery state, for example, are clearly displayed even when changing from cold to warm areas of use. The whole RX 60 is subjected to constant on-board diagnosis.
* With 5 selectable drive programs the driver can match the driving characteristics of the RX 60 to the application situation or to what is personally preferred at any time. Each program can be precisely adapted to the application profile in order to achieve optimum economy and load turnaround performance.
* The driver’s compartment of the RX 60 provides a lot of head room even for tall drivers, and also good all round vision thanks to the large viewing panels in the roof, very slim overhead guard legs and the high seating position.

DATA SHEET

ModelMaximum capacity* (kg)Maximum lift height (mm)Travel speed (km/h)Battery voltage (V)Data Sheet- Download**
RX 60-161.6007.87020.080English
RX 60-181.8007.72020.080English
RX 60-202.0007.91520.080English

 

* Rated capacity at standardised lift height and standardised load centre.
** To examine PDF documents you will require the Acrobat-Reader from Adobe.

FM-4W 4-Way Reach Truck

FM-4W 4-Way Reach Truck

Fully functional in all directions

MENU

กลุ่มบริษัทในเครือ

 

รายละเอียดสินค้า

Standard equipment

The FM‑4W is a powerful and energy-efficient four-way reach truck. It transports loads forwards, backwards and sideways. This makes this universal truck particularly well suited for transporting long items (in addition to normal pallets and containers). The smart four-way design also allows for a highly cost-effective use of warehouse space because the reach truck can itself be safely and quickly manoeuvred down even the narrowest of aisles. And it always puts in a good shift too: the FM‑4W can lift loads with a total weight of 2,500 kg and its high residual load capacity means that it can carry loads weighing as much as 1,000 kg to a height of 9.5 m.

The integrated weight and height display and the comfortable tilt seat greatly facilitate load handling, while the mast and overhead guard are designed to optimise the driver’s view of the transported load. Other benefits that make work easier are the lift height pre-selection system and the lift height assistance system. The optional systems noticeably facilitate the quick and precise depositing and retrieval of goods. The seat, arm rests, steering wheel and foot plate can be adjusted to enhance ease of use. A wide range of settings allow the cabin to be adjusted to suit any driver, ensuring optimised ergonomics.

Power

* Stable mast with high residual load capacity for lift heights of up to 9.5 metres (1,000 kg)
* Powerful acceleration combined with high driving speed (up to 13 km/h)
* Sufficient energy for all applications thanks to battery capacities of 465–930 Ah

Precision

* The mast and overhead guard are designed to optimise visibility of the goods
* The wheels can be instantly turned 90° for precise sideways travel
* The hydraulics are closely controlled by proportional valve technology
* Integrated weight and height display for precise load handling
* Excellent handling performance: easier loading and unloading thanks to height assistance system

Ergonomics

* Can be ergonomically adjusted to suit any driver: adjustable seat, arm rests, steering wheel and foot plate
* All functions can be easily operated using the joystick or fingertip control system, without having to keep changing hands
* Comfortable and practical: the seat can be adjusted to suit the driver’s weight and has a narrow backrest to ensure good visibility out the back
* The comfortable tilt seat with its pneumatic lumbar support makes it easy to look up and past the goods (maximum tilt: 18°)

Compactness

* Suitable for use in even the narrowest of aisles thanks to the reach truck concept
* Four-way design allows for long items to be transported down the narrowest of aisles

Safety

* The large step and handle make it safe and easy to get in
* Load and truck protection: the assistance system stops forks from coming into contact with the forklift truck’s wheel arms
* Work safety: precise movement control
* A high level of driver safety is ensured by load-dependent speed limits and Curve Speed Control

Environmental Responsibility

* Energy is recovered during the braking process to prolong the use of the truck and optimise its use of resources
* Energy savings: the steering electronics are activated only when the steering wheel is moved

Data Sheet

 
ModelMaximum capacity* (kg)Maximum lift height (mm)Travel speed (km/h)Battery voltage (V)Data Sheet- Download**
FM-4W 202.0008.4501348English
FM-4W 252.5009.6501348English

 

* Rated capacity at standardised lift height and standardised load centre.
** To examine PDF documents you will require the Acrobat-Reader from Adobe.

Driver Seated Reach Truck FM-X SE

Driver Seated Reach Truck FM-X SE

MENU

กลุ่มบริษัทในเครือ

 

Highlights

* For combined indoor and outdoor use thanks to superelastic tyres
* Precise and exact hydraulic control with Fingertip operation or
* Joystick 4Plus
* Holistic ergonomics concept

รายละเอียดสินค้า

Thanks to its superelastic special tyres, the smart driver seated reach truck allows for optimum goods transport not only in the warehouse, but also outside!

Loads weighing up to two tonnes are quickly and reliably transported to the desired location by the FM-X SE at a maximum speed of 14 km/h. Once there, it lifts them to a height of up to eight metres. Due to the large cushioned tyres and the high level of ground clearance, the driver seated reach truck is also ideally suited to loading and unloading goods from outer shelves. Assistance systems such as the lift height pre-selection or the optional camera system make work easier for the driver, and ensure the utmost precision even with high lifting heights.

A free view fork carriage, a visually-optimised overhead guard and a driver’s seat with optional tilting mechanics offer excellent visibility, no matter whether you choose a wind-protected or full cab. In addition, the FM-X SE is impressive thanks to its sophisticated safety concept. For example, the Curve Speed Control system automatically controls the driver’s speed depending on the steering angle.

With the FM-X SE, you can rely moving goods efficiently, precisely and safely at all times, both indoors and outdoors.

Compactness

* Suitable for even the most narrow working widths, thanks to the reach truck concept

Safety

* The large step and handle make it safe and easy to get in
* Robust steel chassis with secure contour guiding in areas that are hard to drive on
* Versatile, flexible access control with FleetManager™ 4.x
* Extremely safe to drive round bends with curve speed control depending on steering angle

Environmental Responsibility

* Long-lasting and energy-saving LED headlights
* Blue-Q efficiency module saves up to 10 % energy at the press of a button with no loss of performance
* Energy recovery when braking means you can use the machinery for longer with optimum use of resources

Data Sheet

ModelMaximum capacity* (kg)Maximum lift height (mm)Travel speed (km/h)Battery voltage (V)Data Sheet- Download**
FM-X 14 SE1.4008.0001448English
FM-X 17 SE1.7008.0001448English
FM-X 20 SE2.0007.8001448English

 

* Rated capacity at standardised lift height and standardised load centre.
** To examine PDF documents you will require the Acrobat-Reader from Adobe.

Driver Seated Reach Truck FM-X

Driver Seated Reach Truck FM-X

Top-level precision.

MENU

กลุ่มบริษัทในเครือ

 

Highlights

* 13-metre lift height with high residual load capacity
* Active load stabilisation (ALS)
* Holistic ergonomics concept

รายละเอียดสินค้า

The FM-X is always more than just a fork ahead of the rest. Thanks to active load stabilisation (ALS) you can deal with the next goods transport while others would still be waiting for the mast to stop vibrating.An automatic equalising pulse provides a fast and effective way of stopping the vibrations from occurring at great heights, reducing the waiting time at the shelf by up to 80 per cent. The result is a significant increase in turnaround speed.

Furthermore, the available storage space can be used more efficiently with the FM-X than ever before; the high residual load capacity means that the reach truck can lift loads of up to 1,000 kg to an incredible height of 13 metres.

The holistic ergonomics concept ensures relaxed, comfortable and safe work throughout each shift. Foot plates, steering wheel, seat – all these elements can be adapted in various ways according to the working situation, build and preferences of the driver.

Numerous other details, such as a driver’s seat with optional tilting technology as well as STILL’s exclusive sideshift mast, make the FM-X the ideal warehouse organiser – from the handling of high shelves to long-distance transport and the replenishment of pallet goods.

Compactness

* Suitable for even the most narrow working widths, thanks to the reach truck concept
* Thanks to its particularly narrow chassis, the FM-X N is suitable for use in block storage and one-way shelving

Safety

* The large step and handle make it safe and easy to get in
* Versatile, flexible access control with FleetManager™ 4.x
* Extremely safe to drive round bends with curve speed control depending on steering angle

Environmental Responsibility

* Long-lasting and energy-saving LED headlights
* Blue-Q efficiency module saves up to 10 % energy at the press of a button with no loss of performance
* Energy recovery when braking means you can use the machinery for longer with optimum use of resources

Data Sheet

ModelMaximum capacity* (kg)Maximum lift height (mm)Travel speed (km/h)Battery voltage (V)Data Sheet- Download**
FM-X 101.0007.00014.048English 
FM-X 10N1.0007.00014.048English 
FM-X 121.2007.00014.048English 
FM-X 12N1.2007.00014.048English 
FM-X 141.4009.80014.048English 
FM-X 14N1.4009.80014.048English 
FM-X 171.70011.80014.048English 
FM-X 17N1.7009.80014.048English 
FM-X 202.00013.00014.048English 
FM-X 20N2.0009.80014.048English 
FM-X 222.20013.00014.048English 
FM-X 252.50012.05014.048English 

 

* Rated capacity at standardised lift height and standardised load centre.
** To examine PDF documents you will require the Acrobat-Reader from Adobe.

Electric Forklift Truck RX60 6.0-8.0 t

Electric Forklift Truck RX60 6.0-8.0 t

Making light work of things.

MENU

กลุ่มบริษัทในเครือ

 

Highlights

* Compact design and excellent mobility
* Powerful electrical drive unit has very low environmental impact and high handling rate
* Excellent visibility due to driver’s cab being set to one side and high seat position

รายละเอียดสินค้า

Making light work of things

The electric forklifts in the RX 60-60/-80 series are emission-free powerhouses. They have particularly high performance, as well as being extremely compact and manoeuvrable. The flagship model, the RX 60-80/900, can lift up to eight tonnes in working aisle widths of just 4999 mm at a load centre of 900 mm. These strong forklifts are emission-free both inside and out, as well as being a highly efficient means of transport – even in damp and dusty environments. The sensitive control and the maximum speed of up to 17 km/h ensure a high handling rate.

Whether in freight carriers or in manufacturing sectors, handling heavy loads or fast loading and unloading of lorries, its high performance, precise hydraulics and well-conceived forklift ergonomics make the strongest RX-60 model an unbeatable warehouse assistant.

Extensive equipment

Power

* Nominal load capacity of up to eight tonnes at a load centre of 900 mm
* Maintenance-free 80 V 3-phase drive
* Effective movement of goods due to high driving speed of up to 17 km/h
* Sufficient energy for multi-shift operations due to battery capacity of 1240 Ah and lateral battery replacement

Precision

* Optimal set-up of drive unit and hydraulic control at maximum handling rate or best efficiency
* Speed, acceleration and braking can be individually set
* Sensitive operation and continuous control of lifting speed thanks to the latest proportional valve technology
* Driver’s cab set to one side gives optimal view of loads to enable precise load handling
* Intuitive single-pedal control

Ergonomics

* Roomy, comfortable driver’s cab can be individually set up
* Easily accessible controls
* Hydraulic power steering with small steering wheel, optimally offset to the left
* Narrow, adjustable steering column with no annoying display instruments
* Central display and control unit in the driver’s field of vision
* Generous storage space in the right and rear workplace areas
* Consistent operating concept across the whole RX series
* Individually adjustable control concepts (mini-lever, fingertip or joystick)
* Simple and safe entry and exit

Safety

* Perfect all-round visibility due to higher driver’s seat, driver’s cab set to one side, large viewing window in roof and C-pillar to rear
* Optimal safety levels thanks to forklift’s low centre of gravity and steering axle with high self-aligning bearing
* Electrically heated rear windscreen ensures clear visibility in cold environments
* Forklift’s low centre of gravity and a pendulum pivot steering axle ensure optimum visibility
* Outstanding forklift stability when cornering, no electronic assistance required
* Wear-free disc brakes that run in an oil bath

Environmental responsibility

* Low operating costs due to low energy consumption in all operating cycles and long maintenance intervals
* Emission-free drive
* Blue-Q efficiency model saves up to 10 per cent energy at the press of a button with no loss of performance
* Over 95 per cent of all installed materials are recyclable

Data Sheet

 
ModelMaximum capacity* (kg)Maximum lift height (mm)Travel speed (km/h)Battery voltage (V)Data Sheet- Download**
RX 60-606.0008.6701780English 
RX 60-707.0008.4551780English 
RX 60-808.0008.4551780English 
RX 60-80/9008.0007.7051780English 

 

* Rated capacity at standardised lift height and standardised load centre.
** To examine PDF documents you will require the Acrobat-Reader from Adobe.

Electric Forklift Truck RX60 4.0-5.0 t

Electric Forklift Truck RX60 4.0-5.0 t

For the really heavy work.

MENU

กลุ่มบริษัทในเครือ

 

Highlights
* More power
* Optimum efficiency and power handling
* New drive concept with greater dynamics
* Whisper-quiet sound

รายละเอียดสินค้า

The big RX 60 is here.

Individual tasks require an individual solution. For this reason STILL’s modular building block has grown to include the new RX 60 with a maximum capacity of 3.5 – 4.99 t. It represents the optimum in both economy and turnaround of goods. This is thanks to the new drive concept with greater dynamics, increased economy and distinctly greater power reserves.
This robust electric forklift truck fulfils even the heaviest tasks with the lowest energy consumption.

The consumption figures for this model are correspondingly low, yet it has even more to offer. Fitted with a new optimised visibility mast it also provides extremely clear viewing characteristics. An important building block for fast, accurate work and greater safety at the workplace.

Data Sheet

ModelMaximum capacity* (kg)Maximum lift height (mm)Travel speed (km/h)Battery voltage (V)Data Sheet- Download**
RX 60-404.0007.1802080English 
RX 60-454.5007.1802080English 
RX 60-504.9997.1802080English 
RX 60-35/6003.5007.1802080English 
RX 60-40/6004.0007.1802080English 
RX 60-45/6004.5007.1802080English 
RX 60-50/6005.0006.8801980English 

 

* Rated capacity at standardised lift height and standardised load centre.
** To examine PDF documents you will require the Acrobat-Reader from Adobe.

Electric Forklift Truck RX60 2.5-3.5 t

Electric Forklift Truck RX60 2.5-3.5 t

For the really heavy work.

MENU

กลุ่มบริษัทในเครือ

 

Highlights

* Extremely high performance and driving dynamics
* Prolonged use on one battery charge
* Large foot space with inclined floor plate and anti-slip covering

รายละเอียดสินค้า

Driver’s compartment.
The driver‘s work place in the RX 60.
The large footwell featuring an inclined floor plate and anti-slip lining provides quick and convenient entry and exit and a relaxed leg position when driving. The adjustable steering column with its small steering wheel is ergonomically efficient, requiring minimal steering movements from the driver. The automotive style pedal layout can be replaced by a double pedal arrangement if required. The drive direction switch on the valve lever (hoist and lower) allows the driver to change direction without releasing his grip, thus reducing fatigue, even on long shifts. The fully graphic display is heated to ensure that all essential information, including time, battery charge state, maintenance intervals etc., remains clearly visible under all conditions – even in extreme applications such as cold stores or all-weather indoor/outdoor working. The entire truck is under constant on-board diagnosis. With 5 selectable drive programs the driver can match the driving characteristics of the RX 60 to the application or his personal preferences. Each program can be precisely matched to the application profile in order to achieve optimum economy and load turnaround. The driver‘s compartment of the RX 60 provides generous head room even for tall drivers, with good all-round vision thanks to the large viewing panels in the roof, very slim overhead guard legs and high seating position.

Safety

In conjunction with the mechanical parking and service brake, the RX 60 brakes automatically when the drive pedal is released, guaranteeing safe use at all times. The truck will also hold its position on a gradient without the need to depress the footbrake, further enhancing safety. The RX 60’s side battery change can be carried out using a hand pallet truck, low lift pallet truck or forklift truck. This not only gives significant time savings compared to a conventional hoist, but makes the battery changing operation much safer. The risks of operator injury or truck damage are considerably reduced.
Service

The maintenance interval of the RX 60 is 1000 operating hours or 12 months. These intervals save time and maintenance costs – especially with single-shift operation, where 1000 hours roughly corresponds to annual operating hours, enabling the maintenance and UVV safety checks to be carried out at the same time. Fast diagnosis via a notebook computer and easily accessible maintenance components, together with readily available parts, guarantee short service times and maximum uptime.
Drive

The driver space of the RX 60:
The large foot room with the slanted floor plate and anti-slip mat allows mounting and leaving the truck quickly and comfortably and permits a relaxed position of the legs of the driver. The adjustable steering column with the small steering wheel allows to position the wheel ergonomically for the driver and requires only small steering movements.
The layout of the foot well as in a passenger car can optionally be replaced by twin pedal controls in order to adapt the RX 60 to the personal driving habits of the driver for maximum turnover of goods. The travel direction selector switch close to the valve lever (lift and lowering) allows fast and comfortable switch of the travel direction without the driver having to change the position of his hands for fatigue-free and concentrated work, also during long shifts. The heated, fully graphical display can show the time, maintenance intervals and charging condition of the battery always clearly visible, also if the truck moves from cold to warm areas during the operation. All systems of the RX 60 are constantly monitored for failures. 5 selectable driving programs allow the driver to adapt the driving characteristics of the truck to changed work situations or to his personal habits at any time. In addition each program can be finely adjusted to the profile of the application to achieve the optimum economy and turnover performance.
The driver’s space of the RX 60 offers a large head room also for tall drivers and a good panoramic view through the large openings in the roof, very slim supports of the over head guard and the high seat position of the driver.
Electrical system

The RX 60 features digital control with two independent CAN bus systems which ensure that the drive train is not affected by minor electrical failures elsewhere on the truck, while the drive control unit has dual microprocessor monitoring to ensure safe operation. A pre-prepared wiring harness means that auxiliary electrical equipment can be fitted quickly and easily.
Mast

Depending on application, the Telescopic, HiLo or Triplex construction offer the following:
Telescopic: an inexpensive mast design suitable for many applications, with full visibility through the mast
HiLo: Complements the Telescopic mast due to an additional, central, full free-lift cylinder to allow high stacking under low ceilings e.g. for use in containers of lorries right up to the roof
Triplex: for use where there are low doorways but high lift heights, for utilisation of warehouses right up to the roof. The fork carriage has optimised visibility thanks to its frame construction
Hydraulic system

The RX 60 is equipped with a highly efficient hydraulic system featuring a specially-developed low-noise gear pump. This, combined with a new, energy-saving tilt control valve which reduces the amount of energy required to tilt the mast when unladen, ensures less wear and lower energy consumption. Pump motor speed is demand-controlled and extremely sensitive. Precise response to input from valve levers and steering wheel allows loads to be positioned to the nearest millimetre – providing greater safety in operation while reducing noise and energy consumption. The entire hydraulic system is protected by pressure-relief valves, and the use of a priority valve mounted directly to the pump reduces the number of hoses and connections required, thus reducing the risk of failure and leakage. In summary: safer, cleaner and more economical operation.

Data Sheet

ModelMaximum capacity* (kg)Maximum lift height (mm)Travel speed (km/h)Battery voltage (V)Data Sheet- Download**
RX 60-252.5007.5402080English 
RX 60-25/6002.5007.5402080English 
RX 60-25L2.5007.5402080English 
RX 60-25L/6002.5007.5402080English 
RX 60-303.0007.5402080English 
RX 60-30L3.0007.5402080English 
RX 60-30L/6003.0007.5402080English 
RX 60-353.5007.5402080English 

* Rated capacity at standardised lift height and standardised load centre.
** To examine PDF documents you will require the Acrobat-Reader from Adobe.

Diesel and LP Gas forklift truck RC40 1.6 -3.5 t

Diesel and LP Gas forklift truck RC40 1.6 -3.5 t

For the really heavy work.

MENU

กลุ่มบริษัทในเครือ

 

Highlights

* Easy operation by combined brake/inching pedal
* Additional comfort for the operator by reduced body vibration values
* Fast and easy access to inspection points of the engine

รายละเอียดสินค้า

Convincing concept with impressive details

Fast mover.
The RC 40 is designed to transport goods quickly over medium and long distances including rough roads and yards. Its construction is resilient to effects of the weather and it is therefore perfectly suited for operation in changing weather conditions.

LPG version.
The RC 40 is also available with an LPG engine that can be operated inside warehouses and factories. Here the truck scores with its virtually odourless operation and by not emitting soot particles.

Torque converter.
The RC 40 is equipped with a hydrodynamic power transmission system, also referred to as a torque converter. The drive concept is characterised by high performance and reliability.

 

Data Sheet

ModelMaximum capacity* (kg)Maximum lift height (mm)Travel speed (km/h)Data Sheet- Download**
RC 40-161.6006.95520.0English 
RC 40-181.8006.95520.0English 
RC 40-202.0006.86520.0English 
RC 40-252.5006.28020.0English 
RC 40-303.0006.43020.0English 
RC 40-353.5006.13020.0English 

 

* Rated capacity at standardised lift height and standardised load centre.
** To examine PDF documents you will require the Acrobat-Reader from Adobe.

Diesel and LP Gas forklift truck RX70 6.0-8.0 t

Diesel and LP Gas forklift truck RX70 6.0-8.0 t

It can do anything.

MENU

กลุ่มบริษัทในเครือ

 

Highlights

* Diesel-electric drive with hybrid technology.
* Low operation costs due to low fuel costs in all work cycles and long maintenance intervals.
* Lowest CO2 emission.
* Shortest maintenance interval 1000 hours of operation.

รายละเอียดสินค้า

Drive.
* Diesel-electric drive with hybrid technology.
* Diesel engine directly connected to AC current generator.
* Drive axle with capsulated rotary current drive motor for high torque moment at low motor speed, temperature independent.
* Wear free, oil immersed lamella-type brake.
* Compact design and extreme agility combined with sensitive drive and lift control for optimum work performance.

Ergonomics.
* Large workspace for the driver with high comfort due to optimum arrangement of controls and individual adaptation of the cabin.
* Excellent visibility to all sides due to off-centre position of the
cabin and high seat position.

Safety.
* Low centre of gravity and free floating steering axle for maximum stability.
* Outstanding driving stability when cornering – no need for electronic assistants.
* High residual capacities also for large lift heights.

Economy.
* Low operation costs due to low fuel costs in all work cycles and long maintenance intervals.
* Optimum tuning of drive and hydraulic controls to maximum performance or best efficiency.
* STILL ProActive – reduction of downtimes, fast fault finding,
transfer of error codes to the STILL service centre.

Environment.
* Lowest CO2 emission.
* Engines are far below the exhaust limit values required by EU nonroad directive 97/68/EG (2004/26/EG) EU level 3b/EPA Tier 4i.

Service.
* Shortest maintenance interval 1000 hours of operation.
* Fast fault identification in case of damage by computer assisted diagnostics.
* Optimum service access thanks to large access holes at the sides.

Data Sheet

ModelMaximum capacity* (kg)Maximum lift height (mm)Travel speed (km/h)Data Sheet- Download**
RX 70-606.0008.67020English 
RX 70-707.0008.45520English 
RX 70-808.0008.45520English 
RX 70-80/9008.0007.70520English 

 

* Rated capacity at standardised lift height and standardised load centre.
** To examine PDF documents you will require the Acrobat-Reader from Adobe.

Diesel and LP Gas forklift truck RX70 4.0-5.0 t

Diesel and LP Gas forklift truck RX70 4.0-5.0 t

It can do anything.

MENU

กลุ่มบริษัทในเครือ

 

Highlights

* Diesel-electric drive with hybrid technology
* Low operation costs due to low fuel costs in all work cycles and
long maintenance intervals
* Lowest CO2 emission
* Compact design and extreme agility

รายละเอียดสินค้า

Drive

* Diesel-electric drive with hybrid technology
* Diesel/LPG engine with directly connected rotary current generator
* Drive axle with capsulated rotary current drive motor for high torque moment at low motor speed, temperature independent
* Wear free, oil immersed lamella-type brake
* Compact design and extreme agility combined with sensitive drive and lift control for optimum work performance
* Used Trucks
* Used Trucks
* Used Trucks

Ergonomics
* Large workspace for the driver with high comfort due to optimum arrangement of controls and individual adaptation of the cabin
* Excellent visibility to all sides

Safety
* Low centre of gravity and free floating steering axle for maximum stability
* Outstanding driving stability when cornering – no need for electronic assistants
* High residual capacities also for large lift heights

Economy
* Low operation costs due to low fuel costs in all work cycles and long maintenance intervals
* Optimum tuning of drive and hydraulic controls for maximum performance or best efficiency
* STILL ProActive – reduced downtimes, fast fault detection, transmission of error codes to the STILL service centre
Environment
* Lowest CO2 emission
* Exhaust gasses of the engines are far below the limit values required by EU non-road directive 97/68/EG (2004/26/EG) EU level 3b/EPA Tier 4i
Service
* Shortest maintenance interval 1 000 hours of operation
* Fast fault identification in case of damage by computer assisted diagnostics
* Optimum service access thanks to large access holes at the sides

Data Sheet

 

ModelMaximum capacity* (kg)Maximum lift height (mm)Travel speed (km/h)Data Sheet- Download**
RX 70-404.0007.18021English 
RX 70-40 T4.0007.18021English 
RX 70-454.5007.18021English 
RX 70-45 T4.5007.18021English 
RX 70-504.9997.18021English 
RX 70-50 T4.9997.18021English 
RX 70-50/6005.0006.88021English 
RX 70-50/600 T5.0006.88021English 

 

* Rated capacity at standardised lift height and standardised load centre.
** To examine PDF documents you will require the Acrobat-Reader from Adobe.